CyberPower PDU20SW8RNET Manual de usuario descargar pdf (Pagina 92)

Details of UPS RMCARD

Summary

The Summary tab provides an overview of the system information:

 Name: The name of the selected device.

 Status: Displays the present status of the selected UPS/PDU/ATS.

 Location: Where the UPS/PDU/ATS is located.

 Contact: Who to contact about the UPS/PDU/ATS.

 Address: The IP address of the UPS RMCARD, PDU or Agent computer’s network interface.

 PC & Equip: The number of the powered computers and equipment.

 Outlets: The amount of outlets on the UPS/PDU/ATS.

 Outlet On: The outlets which are supplying power.

 Outlet Off: The outlets which are not supplying power.

 Power Source: The power source of the UPS, e.g. Utility or Battery.

 Remaining Runtime: The estimated amount of time remaining that the UPS can supply power, given its current

load.

 Capacity: The capacity of the batteries expressed as a percentage of full charge.

 Statistics: Indicates the state of the device as Normal, Severe, Warning or Untouched.

 Severe: Devices with severe-level events such as Overheat or Output is off.

 Warning: Devices with warning-level events such as Utility power failure or Battery need replacement.

 Untouched: Devices which have lost communication with Center.

 Type: The type of software the selected device is running, e.g. Agent, Client or Equipment.

 Current Source: Indicates which input source is being using and will be also annotated preferred or redundant

source.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 132 133

Sin comentarios

CyberPower PDU20SW8RNET Manual de usuario Pagina 92