CyberPower PDU20SW8RNET Manual de usuario descargar pdf (Pagina 49)

 If the ATS is a power extension from the one UPS, enter the IP address of UPS for one power source

and another power source should be set None. Click OK to establish the communication.

 If the ATS is not the power extension from any UPS, the IP address of UPS for two power sources should

be set None. Click OK to establish the communication.

Troubleshooting Inability to Communication

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 132 133

Sin comentarios

CyberPower PDU20SW8RNET Manual de usuario Pagina 49