CyberPower PowerPanel Manual de usuario descargar pdf (Pagina 28)

PowerPanel Personal Edition User Manual

Performing A UPS Self-Test

You can perform a Self-Test to verify that the batteries are good and the UPS operates as it should. The Self-

Test screen displays the date and the result of the latest Self-Test. Click the Initiate self-test button to initiate a

Self-Test.

Self-Test Screen

After the Self-Test, the result is reported with detailed information as explained below:

 Date of last self-test - The date on which the last Self-Test was performed.

 Result of last self-test - The result of the last Self-Test.

o Passed - The battery works normally.

o Failed - The Self-Test resulted in a failure. This can be caused by missing batteries, battery malfunction,

or low batteries.

o Aborted - The Self-Test was aborted. This is caused by a loss of communication during the Self-Test.

o Battery capacity is critical - The UPS has insufficient capacity to support a Self-Test. Wait several

hours for the batteries to charge and attempt the test again.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 38 39

Sin comentarios

CyberPower PowerPanel Manual de usuario Pagina 28